| 
								 | 
							
								
  | 
							
								
  | 
						
								
  | 
						
| 
			
			
			
			 Registered 
			
			
		
			
			
								
		
	 | 
	
	
	
		
		
		
			
			 
				
				US Spec 3.2L Compression Ration
			 
			
			Is 130 to 135 across all 6 cylinders on a 1984' US spec 3.2L an okay compression or is that starting to get on the low side. 
		
	
		
	
			
				Thanks  | 
||
| 		
			
			 | 
	
	
  | 
| 
			
			
			
			 Registered 
			
			
		
			
				
			
			
								
		
	 | 
	
	
	
		
		
		
		
		
		 
			It is very low, but should run.  Fresh after a rebuild mine was closer to 190. 
		
	
		
	
			
			
		
		
		
		
		
			1986 Porsche 3.2 Compression - YouTube 
				__________________ 
		
		
		
		
		
	
	Ed 1973.5 T  | 
||
| 		
			
			 | 
	
	
  | 
| 
			
			
			
			 Reiver 
			
			
		
			
				
			
			
			Join Date: Nov 2011 
				
				
				
					Posts: 57,502
				 
                
				
				
				
				 | 
	
	|||
| 		
			
			 | 
	
	
  | 
| 
			
			
			
			 Registered 
			
			
		
			
			
								
		
	 | 
	
	
	
		
		
		
		
		
		 
			Cold.
		 
		
	
		
	
			
			
		
		
		
		
		
		
		
	
	 | 
||
| 		
			
			 | 
	
	
  | 
| 
			
			
			
			 Go-Kart Mozart 
			
			
		
			
				
			
			
								
		
	 | 
	
	
	
		
		
		
		
		
		 
			As a reference point my 150k mile 86 is in the mid 170s.  -J
		 
		
	
		
	
			
			
		
		
		
		
		
			
				__________________ 
		
		
		
		
		
	
	86 Carrera Every normal man must be tempted at times to spit on his hands, hoist the black flag, and begin to slit throats. H. L. Mencken  | 
||
| 		
			
			 | 
	
	
  | 
| 
			
			
			
			 Reiver 
			
			
		
			
				
			
			
			Join Date: Nov 2011 
				
				
				
					Posts: 57,502
				 
                
				
				
				
				 | 
	
	
	
		
		
		
		
		
		 
			numbers will be less when cold but imo that's still on the low side...I'd have it done warm/hot and have a leak down done if you are doing a PPI
		 
		
	
		
	
			
			
		
		
		
		
		
		
		
	
	 | 
||
| 		
			
			 | 
	
	
  | 
 
 | 
| 
			
			
			
			 Registered 
			
			
		
			
			
								
		
	 | 
	
	
	
		
		
		
		
		
		 
			Yes I think I will do a leak down test on it. Thanks for all the replies.
		 
		
	
		
	
			
			
				
					 | 
||
| 		
			
			 | 
	
	
  |