Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 911 Technical Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered
 
Join Date: Nov 2010
Posts: 660
How many hides would I need?

Hi folks -

Thinking about redoing the interior on my SC. I'd like to keep it "full leather" even though it's not truly an original car. I'd need to do the door panels, rear quarter interior panels, front and rear seats, and the vertical panel on the rear firewall.

I'm thinking 5 hides?

-S

__________________
1980 911 SC - Black on Red
Chronicles of my '80 SC: http://forums.pelicanparts.com/porsche-911-technical-forum/844949-chronicles-my-80-911-sc-91a0140491.html
Old 03-27-2016, 12:58 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Registered
 
Join Date: Mar 2014
Location: Palm Coast FL
Posts: 1,194
I had my sc estimated at two including the dash but minus the two front seats.
__________________
78 911 st backdate
87 944
00 996
Old 03-27-2016, 05:19 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
Registered
 
gliding_serpent's Avatar
 
Join Date: Oct 2011
Location: Nova Scotia, Canada
Posts: 2,151
Garage
how big are the hides? What is the quality of the leather? What is your level of tolerance for hide texture differences and imperfections? All can play a big role in how much "good leather" you will get per hide.

I bet three would be plenty and would allow you to do the seats also. I got four hides for my rs interior car with two sets of front seats, rs doors, headliner, and with lots extra as the match was so perfect, the price was right, and I knew I would never get the same dye lot again. I figure go with more than you need. Your upholstery guy should be able to give you an estimate.
__________________
1997 BMW M3 (race car) with S54 engine swap "The Rocket"
1984 Porsche 911 3.4 Carrera
1973 BMW 2002Tii
2016 Ford Focus RS

Last edited by gliding_serpent; 03-27-2016 at 05:56 PM..
Old 03-27-2016, 05:53 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
San Diego, CA
 
Join Date: Mar 2015
Posts: 402
It also depends on how large and how clean of defects the hides are. The more pleats, the less defects matter. When I used to buy leather for restorations some years ago hides were 40 to 50 sq ft each with most closer to 40. I assume hides still are the same size today. My guess is you need 3 to 4.
Old 03-27-2016, 05:53 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
Registered
 
gliding_serpent's Avatar
 
Join Date: Oct 2011
Location: Nova Scotia, Canada
Posts: 2,151
Garage
Quote:
Originally Posted by Avanti View Post
It also depends on how large and how clean of defects the hides are. The more pleats, the less defects matter. When I used to buy leather for restorations some years ago hides were 40 to 50 sq ft each with most closer to 40. I assume hides still are the same size today. My guess is you need 3 to 4.
mine were 40 to 62sq feet each.
__________________
1997 BMW M3 (race car) with S54 engine swap "The Rocket"
1984 Porsche 911 3.4 Carrera
1973 BMW 2002Tii
2016 Ford Focus RS
Old 03-27-2016, 05:58 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #5 (permalink)
Registered
 
marko's Avatar
 
Join Date: Oct 2000
Location: Tampa,fl
Posts: 657
Something to keep in mind is not to under estimate what you need. If you run out of leather and need more, the color may not match exactly on your next order.
__________________
'90 944S2 cab - sold after 20 years, will not be forgotten.
'04 Mercedes SL500 - Nice but my S2 was more fun to drive.
Old 03-27-2016, 06:00 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #6 (permalink)
 
Registered
 
Turboo934's Avatar
 
Join Date: Jul 2007
Location: Taoos New Mexico
Posts: 661
You'll need six hides,four for the cabin and two for the seats.It was what I did.
__________________
Robert. 1976 930/934 Turbo Carrera RRS, Cristine She can be evil but oooh so much fun
Old 03-27-2016, 11:22 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #7 (permalink)
Registered
 
Join Date: Jul 2015
Location: Jacksonville, Fl
Posts: 1,253
Garage
My Carrera used 2 hides for the front and rear seats, this does not include the backs of the front seats. There is a little left over for small things...bit nothing substantial. I also think hides vary in size?

__________________
Chris - Insta @chrisjbolton
1975 911s Insta: @911ratrod steel wide body, 3.6 conversion
1989 911 Carrera 25th Anniversary Ed (5th from the last car to ever leave the original Porsche factory assembly line)
2001 996 Turbo - ~54k miles
Old 03-28-2016, 05:52 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #8 (permalink)
Reply


 


All times are GMT -8. The time now is 03:53 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.