Introduction to engine rebuilding class......

[Tbone425]

Originally Posted by bourgeois911

I for one would be interested in paying for a video version of the class to help defray the cost and of course make sure Tony gets compensated for the effort.

I would pony up a few hundred bucks for this easily.

[kevbo]

Good day Tony,

I'm looking forward to this class and I'd like to start getting organized with my flight plans, local transportation, and accommodations.

If I recall you are about 30 minutes north of Philly?

What hotel would you recommend close to where the sessions are being held?

Where can I get a real Philly cheese steak?

What are some other good restaurants?

Let me know if there's anything I can do to make this easier for ya. (I'm coming in Sunday prior and can help setup/clean if need)

Kevin

[boyt911sc]

Originally Posted by kevbo

Good day Tony,

I'm looking forward to this class and I'd like to start getting organized with my flight plans, local transportation, and accommodations.

If I recall you are about 30 minutes north of Philly?

What hotel would you recommend close to where the sessions are being held?

Where can I get a real Philly cheese steak?

What are some other good restaurants?

Let me know if there's anything I can do to make this easier for ya. (I'm coming in Sunday prior and can help setup/clean if need)

Kevin

Kevin et al,

My wife is preparing a list of hotels and restaurants near the venue (19401). I will include this list to the email I will be sending out to each and every participants. Anyone arriving the day before the first day is welcome to stop by and take a look at the classroom and set up. Or someone organize a group outing for dinner like we did before. Any assistance is welcome. Thanks.

Tony

[Targa4now]

Hi Tony- Pleasure speaking to you and I look forward to attending the April 27/28 class.

Regards

[boyt911sc]

Below are the different group sessions for the forth coming Engine Rebuilding Classes.

April 16-17 (Thur. & Fri.):
1. TooManyStars
2. Marc718B
3. Gretz
4. Carl S
5. Munchen88
6. Leo Jaramillo
7. Contigo2
8. Matrix 01

April 20-21 (Mon. & Tue.):
1. Ramonesfreak
2. MBruen
3. BRSHAP
4. KSLuna
5. Dreamer52
6. Live To Pedal
7. NiDitz1
8. Jascha

April 23-24 (Thur. & Fri.):
1. TrippyLoaf
2. Blucille
3. Setho
4. Geronimo
5. MHackney
6. Mixed76
7. MST0118
8. VACANT taken by David C.


April 27-28 (Mon. & Tue.):
1. Kevbo
2. Special CK
3. SoCalSK8R
4. SEDouglas
5. StaggerSaint
6. David Borden
7. Kraftwerk
8. VACANT Reserved for Jeff N. (January 22).

April 30 - May 1 (Thur. & Fri.):
1. Arizona Green
2. BLG 5035
3. Kazoo-Mal
4. Speed5
5. Dynamick
6. Petr916
7. ZAZ
8. VACANT. Taken by Rainer A. (January 13).

May 4-5 (Mon. & Tue.):
1. Arden 88G50
2. NALB
3. 930 Slant
4. Gebrocken
5. Leos53
6. NGRich99
7. DavidMN
8. USERA

May 7-8 (Thur. & Fri.):
1. Chris Geolas
2. Stephanie Geolas
3. Sergio Villasenor
4. Yuri Dobrowolski
5. Brian Lay
6. Christopher Burk
7. vacant Reserved for Reybel Melendez
8. vacant

I will be sending emails to everyone listed above for the details and address where the venue will be held. If I have missed anybody please call my attention. Thanks to everyone for your participation.

Tony

[ramonesfreak]

Can we get an address soon to make hotel reservations?

[mikewerx]

Hi Tony,
I'm also interested in attending one of your classes. Can you advise what engine(s) you'll be working on? Thanks! Mike

[Mister e]

I'm interested as well.

[sedouglas72]

Originally Posted by ramonesfreak

Can we get an address soon to make hotel reservations?

Tony gave zip code 19401. It's a pretty small area.

[JeffShoots]

Can we please get a California or Reno Nevada Class? Something on the West Coast?

[boyt911sc]

Below are the different group sessions for the forth coming Engine Rebuilding Classes.

April 16-17 (Thur. & Fri.):
1. TooManyStars
2. Marc718B
3. Gretz
4. Carl S
5. Munchen88
6. Leo Jaramillo
7. Contigo2
8. Matrix 01

April 20-21 (Mon. & Tue.):
1. Ramonesfreak
2. MBruen
3. BRSHAP
4. KSLuna
5. Dreamer52
6. Live To Pedal
7. NiDitz1
8. Mike Fiazzo

April 23-24 (Thur. & Fri.):
1. TrippyLoaf
2. Blucille
3. Setho
4. Geronimo
5. MHackney
6. Mixed76
7. MST0118
8. David Clardy

April 27-28 (Mon. & Tue.):
1. Kevbo
2. Special CK
3. SoCalSK8R
4. SEDouglas
5. StaggerSaint
6. David Borden
7. Kraftwerk
8. Targa4now

April 30 - May 1 (Thur. & Fri.):
1. Arizona Green
2. BLG 5035
3. Kazoo-Mal
4. Speed5
5. Dynamick
6. Petr916
7. ZAZ
8. Rainer A.

May 4-5 (Mon. & Tue.):
1. Arden 88G50
2. NALB
3. 930 Slant
4. Gebrocken
5. Leos53
6. NGRich99
7. DavidMN
8. USERA

May 7-8 (Thur. & Fri.):
1. Chris Geolas
2. Stephanie Geolas
3. Sergio Villasenor
4. Yuri Dobrowolski
5. Brian Lay
6. Christopher Burk
7. vacant Reserved for Reybel Melendez (?)
8. vacant

If I have missed anybody please call my attention. Thanks to everyone for your participation. The venue is at 302 E. Brown Street, Norristown, PA 19401.

There are only two (2) seats available. I am limiting the number of participants per session to 8 attendees. Thanks.

Tony

[Matril01]

For those of you attending the April 16-17 class, I booked the Marriott Springhill Suites. Google says it’s 2.5 miles away. $205 total for both nights. Address is 430 Plymouth Road, Plymouth Meeting, PA, 19462. I’m looking forward to class and meeting my classmates. Best, Lee


Sent from my iPhone using Tapatalk

[Marc718B]

Tony is that the right address? I only see houses at that location (or maybe Google is taking me to the wrong one). Let us know....

[boyt911sc]

Originally Posted by Marc718B

Tony is that the right address? I only see houses at that location (or maybe Google is taking me to the wrong one). Let us know....

Marc,

The address is correct. 302 E. Brown Street, Norristown, PA 19401. The original plan was to have the venue in the same building we had in 2018. But the owner of the building has informed me that the property is for sale and a new owner is eminent. He could not guarantee me the availability of the room in April and May.

A decision was made to relocate the Engine Rebuilding Classes to a place I could secure for April and May. After discussing this with my family, I was given the go ahead by my wife to have it at home. We have a two-car garage and soon-to-be a three-car garage. There is plenty of room and the chance to test run a motor. I was not allowed to run a gas driven motor in the old place due to insurance restriction.

Right now, work is being done to renovate and build an extension for additional floor space. I have 5 motors available now for the class. See everyone in spring.

Tony

[MeinTarga]

Id like to take one of the vacant spots.
PM sent.

[dtvarnum]

wow. I hope this is recorded as I would buy the DVD.

[ma356r]

Pm sent.

[Matril01]

Tony- I’m curious as to what year engine we will be working on. If it makes a difference, I’m in the April 16-17 class. Thx!


Sent from my iPhone using Tapatalk

[boyt911sc]

Originally Posted by Matril01

Tony- I’m curious as to what year engine we will be working on. If it makes a difference, I’m in the April 16-17 class. Thx!


Sent from my iPhone using Tapatalk

Lee,

I have five (5) 3.0 liter SC motors available this time.
Two (2) complete motors including exhaust and CIS for engine start up.
Two (2) long blocks for tear down and assembly.
One (1) newly rebuilt long block for valves and cam timing.

If you have any question or concern, please contact me. Thanks.

Tony

[Matril01]

Thx for the info Tony


Sent from my iPhone using Tapatalk