Finished the trans rebuild this weekend and everything went pretty smooth. Had to make a few special tools, but overall it was pretty easy.

https://live.staticflickr.com/65535/...3619a7b5_c.jpg
https://live.staticflickr.com/65535/...ce314970_c.jpg
https://live.staticflickr.com/65535/...e7d339a5_c.jpg

https://live.staticflickr.com/65535/...19412658_c.jpg
https://live.staticflickr.com/65535/...234e9192_c.jpg
https://live.staticflickr.com/65535/...12585e96_c.jpg
https://live.staticflickr.com/65535/...466cb968_c.jpg
https://live.staticflickr.com/65535/...bf1004b3_c.jpg

https://live.staticflickr.com/65535/...87a8c626_c.jpg
https://live.staticflickr.com/65535/...6f6c72fc_c.jpg
https://live.staticflickr.com/65535/...4292d4d1_c.jpg
https://live.staticflickr.com/65535/...4b4a724f_c.jpg

https://live.staticflickr.com/65535/...1c22d36f_c.jpg
https://live.staticflickr.com/65535/...20bac912_c.jpg


Called it quits here and ordered the 930 bearing for the CMS Side Cover and shims from McMaster-Carr. I'm also hoping that the machine shop wraps up the work this week or next so I can get the motor assembled.

I've also been in talks with John Behe and it looks like he will be tuning the car near the end of March!

Got a few more parts in over the last few days (diff shims, 930 bearing, Renline bar) and I got most of my stuff back from the machine shop. The heads should be ready next week.

https://live.staticflickr.com/65535/...6358f54b_z.jpg

https://live.staticflickr.com/65535/...504ffc7e_z.jpg

https://live.staticflickr.com/65535/...f34a944d_z.jpg

https://live.staticflickr.com/65535/...efe885c6_z.jpg

https://live.staticflickr.com/65535/...d4949f6f_z.jpg

Update?