Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 912 Technical Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
GS GS is offline
Registered
 
Join Date: Mar 2001
Location: Georgia
Posts: 12
Post Lowering front of 912

I'm restoring my 66 912 and since I live close to Robeling in Savannah I thought I may track it from time to time. I needed some info on lowering the front end. Any advice would be appreciated.

Thanks!

Greg

Old 03-10-2001, 10:23 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Registered
 
Join Date: Dec 2000
Location: UK
Posts: 40
Post

Real easy. There is an adjusting screw on each side. It is situated at the back of the transverse control arm, other than that I carn't think of a better way to describe where it is. If you have a work shop manual it will be refered to as the 'adjusting screw'. By adjusting this it will give you about 2-3 inch of travel. But be sure to get your tracking set afterwards because as you lower the car the front wheels will toe out.

Old 03-10-2001, 12:18 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
Reply


 


All times are GMT -8. The time now is 06:46 AM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.