|
|
|
|
| Author |
|
|
Registered
Join Date: Jan 2002
Location: Long Beach CA, the sewer by the sea.
Posts: 37,760
|
Need help identifying springs
I found some rear springs that were so new that they weren't dirty yet on a 914-6 conversion car that had been rolled. They are on koni shocks with the fixed perch. They are bright yellow, about .450 wire and about 9 winds. They have a small blue part#, HD S-2 stenciled on them. Anyone know what these are?
Thanks 
|
||
06-14-2002, 06:57 PM
|
|
|
Registered
Join Date: Jan 2002
Location: Long Beach CA, the sewer by the sea.
Posts: 37,760
|
Help! Please. Someone must have an idea of at least who manufactured these.
|
||
|
06-17-2002, 08:01 PM
|
|
|
Registered
Join Date: Mar 2002
Location: Phoenix, Arizona USA
Posts: 203
|
I have no idea. But then, I had no idea what my rear springs were, either. Find a friend with a spring tester and see where they rate. I would test them at three different compression positions to see if they are progressive.
Good luck!
__________________
Every corner a come-on, every downshift a kiss! |
||
|
06-18-2002, 08:35 AM
|
|
