![]() |
|
|
|
Registered User
Join Date: Oct 2012
Posts: 28
|
Dtronic differences/simularities 914,bus type III
Can someone inform me if 1.7 914 throttlebodies/intake manifold runner diameter are smaller than a 2.0 or a 1.8 914s. Are bus type IV engines equipped with the same system as the porsche, how about the type III? Any enlightenment will be appreciated.
![]() |
||
![]() |
|
Administrator
|
There may have been some Buses that were fitted with D-jet EFI, but I think the majority of injected Buses were L-jet.
The Type III used a very similar D-jet setup to the 914, but many of the parts were different. The ECU and the MPS were differently calibrated, for one thing. There were D-jet 411s that used Type IV engines; they were pretty much identical to the 1.7 liter 914 stuff. I'm not sure exactly what can be interchanged, frankly. That has never been my interest. --DD
__________________
Pelican Parts 914 Tech Support A few pics of my car: http://www.pelicanparts.com/gallery/Dave_Darling |
||
![]() |
|
Registered User
Join Date: Jul 2012
Posts: 426
|
Type III d-jet is simular the throttle body is different (smaller), however the electrical board on the throttle body is identical to that of the 1.7 914, just mounted differently I belive the injectors might be interchangable with the 1.7 914 but I am not dead sure on that, as it has been a long while since I researched it, memory fades with time
|
||
![]() |
|