Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 924/944/968 Technical Forum


Reply
 
LinkBack Thread Tools Rate Thread
Author
Thread Post New Thread    Reply
Registered
 
Join Date: Dec 2000
Location: Cheyenne,Wy USA
Posts: 9
944 engine noise

My '86 944 has a rotational, metallic scraping noise in the front of the engine. I removed the front cover expecting to hear the noise from a belt pulley or tensioner. They were not noisey. The noise seems loudest near the crank pulley. Does this mean oil pump? Will I have to replace the oil pump or just a bushing/bearing in it? Any help would be appreciated.

Old 12-25-2000, 06:50 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)
Registered
 
Join Date: Oct 2000
Posts: 495
I have 2 cars and have for 8 yrs and havn't heard a noise like tht. can u explain when u hear it, all the time or more about it as to the soumd. Take your a/c belt off and see if it's still there, then if so take the power steering belt off and then the altenator belt. Maybe it will be the bearing in one of those. Good place to start anyway, to rule those out.
Old 12-25-2000, 05:15 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #2 (permalink)
Registered
 
rstoll's Avatar
 
Join Date: Sep 2000
Location: Shreveport, La.
Posts: 1,710
Also make sure the harmonic balancer is not slipping. Chased a noise on my wife's Volvo a few weeks back. Rubber damper on harmonic was allowing pulleys to slip under load of alternator and power steering pump. Sounded more like a belt screeching than a metallic noise though. Just something else easier to check than the oil pump. Good luck.

------------------
Robert Stoll
83 SC
83 944
Old 12-26-2000, 03:54 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #3 (permalink)
Registered
 
Join Date: Dec 2000
Posts: 3
My 86 944 (120K) makes a knocking sound from the timing belt cover area. This only occurs when the engine is first started and lasts until the engine warms up (approx. 45 secs.)then nice and quiet. The car is due in for it's next timing belt change in 5K miles. Is this something I should have looked at or wait till my belt change? Doesn't seem to affect the way the car starts/runs.

Old 12-27-2000, 08:26 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #4 (permalink)
Reply


 


All times are GMT -8. The time now is 04:49 PM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.