|
|
|
|
| Author |
|
|
Registered
Join Date: Jul 2004
Posts: 43
|
87 944 N/A Coding Connection
I have found a red junper wire in the DME harness that connects the DME pin 10 to ground. Checking a manual it suggests this is for California mode. Is the jumper connected or unconnected for non California mode?
Last edited by KitCarlsonEMS; 08-21-2004 at 01:55 PM.. |
||
08-20-2004, 04:59 PM
|
|
|
Registered
Join Date: Jul 2004
Posts: 43
|
Somebody must know.
Last edited by KitCarlsonEMS; 08-21-2004 at 01:57 PM.. |
||
|
08-20-2004, 05:00 PM
|
|
 |
| Thread Tools | |
| Rate This Thread | |
|
|
