FS Manual Steering rack + Intermediate shaft

[v2rocket_aka944]

Originally Posted by 962porsche

all 924 and 944's manual racks are the same with a part # 944 347 011 00 . the what is really called the lower steering shafts are also the same with a part # of 944 347 027 01 .

A 924 rack and a 944 manual rack are nowhere near being the same. I have one of each of these on hand and can take a picture of the two together if you like to show the differences. A 924 rack could probably be made to work in the 944 but you would need some creative brackets to attach it to the 944 crossmember.

Originally Posted by Rasta Monsta

Wrong again. 924/2.0 rack is a 477 part.

Yes.

[v2rocket_aka944]

To clear this up, I decided to go out and take pictures of a 924 2.0L manual rack versus a 944 manual rack.

In the first picture, you will see that although the metal bodies are the same length, and they use the same size tierod locknut, the rack bodies are markedly different in terms of mounting and the rack/pinion lash setting. The 944 rack is the top, 924 is bottom.


In this second picture, you will see the difference in height of the pinion shaft. The longer shaft is for the 944 manual rack, the shorter is the 924 rack.


In this picture, I have laid out the intermediate shafts from a 924 2.0L and a 944 manual steering car. The 924 shaft is a full 1.25" longer than the 944 shaft and has different U-joints, although the splines for both shafts are exactly the same.



You have come into my thread, criticized my pricing and accused me of trying to "bend people over", then start spewing false information because you can't counter my experience of selling these parts. Unless you would like to make an offer to buy these parts, which you are more than welcome to if you disagree with my pricing, please exit this thread until it is closed.

[962porsche]

the part was super seaded ! as stated in my crash books and in my porsche parts disc and micro film . thats wrong is listing things for sale in this category ! i don't do it !ITS WRONG !! you must have wanted to discuss the rack you have for sale ? or why would it be listed in the discussion category ? the way i look at it is if you want no comments then list it were it should be listed and not in this category .

[mattdavis11]

This one spiraled out of control... I wouldn't know what they go for, I haven't shopped them in years. Something didn't look right, so I looked at my spare rack, ends, etc. and posted. Bump for a sale.

[pormike]

Anyway, Is it still for sale. If so email pormike at mac dot com.
Thanks

[cfgioja]

I know this is 6a months old, do u have he rack still or if not do u know where one is.