|
|
|
|
| Author |
|
|
Registered
Join Date: Apr 2005
Posts: 8
|
1979 928 heater control vacuum line problem
I am in the process of finishing a totally stock silver 1979 928.
Some of the vacuum lines on the back of the manual heater control slipped off when I removed the center console. I tried to re attach via trial and error, but that was impossible. I need help or a schematic to re-attach the lines. I have attached a diagram of what I am working with. Any help is greatly appreciated!  If the image does not load you can download it from here: 1979_928_manual_heater_control back make sure you view the picture at full size so you can read the text Thanks Dan Maitzen dan@menterprise.net 801-557-1040 |
||
04-15-2005, 01:25 PM
|
|
|
Registered
Join Date: Sep 2003
Posts: 1,230
|
This should clear things up....
|
||
|
04-15-2005, 03:08 PM
|
|
|
Registered
Join Date: Sep 2003
Posts: 1,230
|
Ooops..hang on..
|
||
|
04-15-2005, 03:10 PM
|
|
|
Registered
Join Date: Sep 2003
Posts: 1,230
|
Try this...
|
||
|
04-15-2005, 03:13 PM
|
|
|
Registered
Join Date: Apr 2005
Posts: 8
|
Thanks 928ram. That's exactly what I needed.
Dan |
||
|
04-16-2005, 10:03 AM
|
|
