|
|
|
|
| Author |
|
|
Registered
|
order of wires on key/ignition switch
In an effort to fix my ignition (the key wouldnt turn...), i took off the wires on the back of it, and the wires came out of order and i dont know what order they go back in. I know this sounds kind of vague. If somebody can tell me the order by color, i'd appreciate it. I know which wires are the headlamps, accessories, starter, etc...just dont know what order they go in.
|
||
08-06-2005, 04:26 PM
|
|
|
928 OB-Wan
Join Date: Apr 2005
Location: NC
Posts: 520
|
while removing the "wiring" did you seperate the ignition switch from the cylinder mechanism or did you yank the wires out of the back of the switch plate?
there are 3 components to the ignition setup cylinder (where you physically put the key) ignition switch (the intermediate piece w/ male and female plugs) ignition wire harness (the bundle of wires with a plug switch) |
||
|
08-10-2005, 09:56 AM
|
|
