|
|
|
|
| Author |
|
|
Registered
Join Date: Jul 2007
Posts: 120
|
FS: Stroker Motor Build Parts
If anyone is considering building a stroker motor, I have most of the components gathered, and would sell them for my cost:
32v cams profiled for stroked 928 race motor 32v head with 968 valves 1986 block bored and lapped 104mm for 968 pistons 968 pistons with HPC coating Scat crank, originally from 928 Intl Oliver rods for 968 pistons and Scat crank Main Bearings grooved Rod bearings - clevite Tri Y Headers Jet Hot Coated Dry sump pan $15k Will consider an SC kit in trade Deal pending on the following: TBI intake with air box parts MoTec M48 (from Sterling setup for 928) Last edited by Stan.Shaw; 09-28-2009 at 02:19 PM.. |
||
09-27-2009, 09:36 PM
|
|
 |
| Thread Tools | |
| Rate This Thread | |
|
|
