[RSBob]

The engine compartment light only activates with the car running with lights on.
The frunk light should go off when the pin switch is pressed. If not you may need a new switch.
The glove box switch will need to be replaced. They really go bad often.
The drivers door switch might be activated by pulling on its black rubber cover and see if it comes on. If so, remove the cover and use a heat gun with a blunt object to stretch the rubber so it is not so tight. If there is no cover on the switch, the switch will need to be replaced. Make sure to secure the wire with a hemostat so it doesn’t fall into the black abyss.

And yes you will need a new turn signal lever but check your fuses and their connections if you haven’t already