[pampadori]

Looking for input on car's value. Chassis is potentially high mileage- ~300k TMU
Interior - a bit rough. Rear seats and side panel leather is dry and hard and sun bleached somewhat. Carpets are old and not great condition. Climate control features not 100%. Heat works but is backdated. Footwell blower inop. Front seats have been replaced with cloth Recaros. Steering wheel is a Momo Prototipo

Exterior - also a bit rough. Few dents, rear decklid gaps not even. Paint is good at 10' away but get close and you see some flaws. Has period correct Gemballa skirts and frt bumper. Targa top will soon receive full stg 4 rebuild.

Motor - lots of work in last few years. Recent rebuild with all bearings replaced, upgraded studs and rod bolts. Reliable, decent power, EFI with ITBs has never failed me since ditching CIS. Does have a couple of leaks at chain box/covers. Has desirable 930/52 case paired with 83 SC heads and all the common upgrades like tensioners and valve covers.
Very responsive - ITBs, EFI, alum pp, alum flywheel, 2.7 crank and rods, BBE heat exchangers, sport and race muffler both available.

bumpsteer kit, 930 tie rods, sticky Conti Sport Contact tires with like 90% left on them.
Basically, its a driver with lots of mods that is a blast to drive but not going to win any shows anytime soon. I feel like the motor and the driving experience are the highlights.

Here is a more comprehensive list of mods:
1983 Porsche 911SC Targa

Engine
9.3:1 pistons with Nikasil compatible rings from EBS
Nikasil lined cylinders EBS
930/52 case from ‘76 930
ARP Head studs
83 3.0 heads completely serviced in 2016 with .016” fly cut from standard
2.7 crank and rods polished and rebushed in 2016
Raceware rod bolts
911sc 3.0 cams
RSR rocker shaft seals
Triumph T595 ITBs and 28# injectors with aluminum fuel rails
PMO rainhats with K&N filters, custom made adapter plates w/ velocity stacks
AEM Infinity 506 ECU
Tomei FPR
BBE Heat exchangers
BBE 2 in, 1 out muffler AND Dynomax 17231 muffler with 2.5” piping
Carrera tensioners
930 lower valve covers
Fidanza Aluminum flywheel
Sachs Aluminum pressure plate
New oil lines from thermostat to motor and reservoir.


Suspension/Steering/Drivetrain
930 tie rods
Bilstein greens
Momo Prototipo
Wevo shift coupler
JWest Rennshift shifter
Bump steer kit (Steering rack spacers)
Refreshed 5th gear synchro, teeth, cage bearing at 71k (indicated)
Swepco 201 fluid


Body Wheels/Tires
Gemballa bumper and side skirts
H5 headlights
Continental Sport Contacts
16x7, 16x8 fuchs powder coated matte gunmetal
Recaro SPG seats
Rennline floor panels
Car Bone floor mats
Openable vent windows from early model
New windshield in 2018
Fire extinguisher with quick disconnect mount

Other
Rebuilt speedometer (Hollywood Speedo. Shows 72k but chassis likely has 300k+)
5th gear slider, synchro ring, dog gears all replaced along with fresh Swepco 201 in 2019