Quote:
Originally Posted by Fredie
Bill,
I am using the Sheridan “Tin” Order from Roger Sheridan directly to save a lot of money. Keep in mind he does these one at a time since he’s basically retired and living in Hawaii. But his turnaround is pretty quick.
As far your pulley is concerned, I am not sure if it will fit. But I hope and think it will fit a 3.2 console.
I was forced to replace my crank pulley as I was running the factory 993 3 belt with a single RS for the alternator in a 993 engine console etc…
Now I am using a Rothsport single belt crank pulley to fit the 3.2 console.
I hope that clears some things up.
Regards,
Steve
|
yes, I spoke w/ Roger Fri, he was one of several like you that suggested the 3.2 console/bar setup
now I hope that the single sheave pulley can be retained, it seems that it's only the longitudinal thickness that can be an issue.
this seems to answer the pulley ?
Quote:
The pulley Rothsport offers fits within the 3.2 console and is the same diameter as the original 993 alternator belt pulley.
I hope this helps
Regards,
Steve
|