|
I am guessing but #18 may be propriety bush material - not brass. #19 may be similar. Judging from the pic I am thinking similar to strut bushes (internal).
If you get the dimensions you can probably source as such. I sourced my strut bushes that way - from a bush catalogue.
If you measure the shaft dimensions and the housing dimensions you will have your bush sizings.
Alan
__________________
83 SC, 82 930 (track) - Stock except for RarlyL8 race headers, RarlyL8 Zork, K27-7006, 22/28 T bars, 007 Fuel head, short 3&4 gears, NGK AFR, Greddy EBC (on the slippery slope), Wevo engine mounts, ERP rear camber adjust and mono balls, Tarret front monoball camber adjust, Elgin cams, 38mm ported heads, 964 IC. 380rwhp @ 0.8bar Apart from above, bone stock:-)
Last edited by Alan L; 03-15-2024 at 08:11 PM..
|