Quote:
Originally Posted by Cobalt
I am assuming they cut the rear cross member out and repalced it with a 993 version to fit the 993 deck lid. This will also require the use of the 993 tail lights. It sounds like you will need to replace the rear cross member to a 964 unit to use the 911 deck lid. The turbo 3.6 lid you have is the same as the 930 part. It just used spacers to make it work. In fact all the non motorized deck lids on the 964 were from the G-body cars.
|
Thank you so much for the advise.
It makes sense as they line up very differently.
I was just searching the forum and noticed that the 993 lids are indeed shorter than the 964 (similar to the g-body).
I’ll have a word with the builder, as the RSR plan is for the body and shell to clone a 964 RSR (but everything else, to clone a 993 RSR).
So they will probably have to make some adjustments and add spacers.
http://forums.pelicanparts.com/porsche-964-993-technical-forum/1113759-rear-engine-deck-there-different-versions.html
Thank you again for you kind advise.
I’m working on this, while I continue my search for 993 RSR 4-Channel ABS full system, and the entire car’s harness.
Best regards.