Rare Mahle 95mm Cylinder Set with Pistons for Mag case engine (80 mm stud spacing)
Yes, you have read this correctly – a 95mm p&c set for a magnesium 7R case engine……
This will result in a 3.0L “cheater” engine using a standard 6 bolt 70.4mm crankshaft.
The cylinder set is a fairly rare casting (Mahle: 95ZN1W3), 95mm bore with 80mm stud spacing.
According to the known/trustworthy person I purchased these from, they were used in the assembly of an engine that was never run……this is evidenced by the sealant on the outer edge of the cylinder base, and the cylinder honing looks to be consistent and excellent, and the cylinders do not appear to be heat cycled at all.
The pistons are brand new custom ordered Max Moritz style, 10.1 : 1, 95mm pistons from Mahle Motorsport for these special cylinders in 2021. They use standard 911 SC piston rings, see piston Spec Sheet below.
The pistons, cylinders and rings are currently fitted and assembled, this work was done by engine builder Steve Becker, former Andial and PMNA employee.
I was planning to use these for a special engine project that never happened, and have since moved to watercooled projects.
Asking: $5400 for the
6 pistons (with new rings and wrist pins) and
6 cylinders, shipped in continental US.
Feel free to ask questions and/or for more photos.
Cheers
Doug N
PS. I have only taken photos of one piston/cylinder, there are six in total included.
