|
Wayne,
Your instructions were very helpful for me as a first time 911 engine remover! I pinte an xtra page showing the 'checklist' and taped it up in the shop.
The only disagreement I have is the eng/tranny or only the eng. removal. :-))
The hex drive bolt over the starter was a bear to get out and had I not taken both eng and tranny out it would have been very dificult. (your instructions has a typo saying "Unfortunately, you CAN see up there, so you will have to figure it out simply by feeling around." You obiously meant 'can't'
We used pieces of pipe under the plywood to move the Engine/plywood on the driveway and pushed it up a plywood covered ramp onto a pickup.
Altogether a very helpful piece and I thank you for posting it.
Ernie
|