What would all the parts required to do a carb conversion to a 3.0L engine be worth?
I have a pair of weber 40 IDA-3c weber carbs in good condition, I recently cleaned the carbs and replaced all the gaskets. Throttle shafts should be fine as well. All throttle linkage is included, rain hats, air filter, fuel pressure regulator, everything.
Also included with the carbs is a complete electromotive HPV-1 crankfire ignition setup. Which includes coil packs, trigger wheel, sensor, plug wires, o2 computer that goes inside the car (original part of an 80 sc), wiring from o2 computer to engine bay, I have the fuse box panel from the engine compartment as well.
Any ideas on the value of all that stuff? Everything is in good working order. The carbs would have to be tuned though.
Here are the current settings on the carbs:
Mains: 140
Emulsion tubes: F3
Air correction Jet: 160
Jet Holder: 60
I'm not sure about the idles I made an incorrect note somewhere but I think they are 150's
Pics:
Any ballpark figures on what this is worth?
Thanks,
Rich