[porsche914gt]

You have to add a jumper wire to connect pin 30 to the red with a white tracer that is connected to pin 56. The red with a white tracer feeds power to the light circuit. and the relay toggles that connection between the yellow wire on pin 56a, and the white wire on pin F. Pin S connects to a yellow with a red tracer wire, and that is connected to the turn signal switch. When it grounds pin S, the relay is momentarily energized, toggling the state of the contacts to change the beam.


Put a jumper from pin 30 to pin 56. Pin 56 can be identified by the red with a white tracer wire.