|
stalling problems?
I just finished a 968 engine in my 87 951. Everything went pretty smooth with no major surprises. One last problem I can't figure out is that it tends to stall went stopping. I will do my best to describe the situation.
When stopping if I depress the clutch, let's say at 3000 rpm, the engine tends to stall almost instantly. If i depress the clutch at 1300 rpm or below it will idle fine. Also it idles perfect at startup.
The 968 engine pulls strong all the way past 6000 and no sputtering through out the power band. No hesitation off the line.
My first thought was replacing the TPS, but I am not convinced that it is faulty.
Any ideas?
|