|
They started making them cheaper here lately =(
The older ones were better
Do not use any sealent, it goes on dry.
Make sure to get off all of the old gasket and clean the mating surfaces with denatured alchohol. Do NOT over torque them. The spec is 13 ft/lbs. I see that your cam cover is powder coated, make sure there are no ridges that can keep it from mating properly.........I would check it with a straight edge.
You are lucky that you didn't end up with an engine fire!!! =0
__________________
84 944(sold)
85 944
86 951
87 944(sold)
87 951
88 951
Turn up the BOOST!!!
|