Quote:
Originally Posted by vdubr928
Its also easily repaired. They don't get much simpler. You may have an open short in the wire though. The light always comes on for a second when you turn the car on. This is the ccm's way of showing you the bulb is good. When you are stopped, engine running, and you set the brake....... does the light come on then? If not then for some reason the circut is never being grounded. You will probably find that the wire is seperated from the button. Little dab of well placed soulder should correct. Use rosin core.
Or go to the junk yard and pick up another. I probably have 6-7 of them if you are unable to find one ill drop one in the mail for you. Pm me if you can't fix yours and can't get local. Should go on a snail mail stamp.
|
Thanks! The light doesn't come on after initial start up. I replaced the long emergency brake cable last year and I bet I disconnected the wire or knocked it loose pulling out the old stuck cable. I will check.