|
I did that same replacement (on both sides) a while back with pieces from my FLAPS. It worked out perfect. Parts were way cheaper than OEM (for the pieces that were still available) and you can bend them all by hand (or you can get the fancy bending tool).
Make sure you get the correct thread ends (take in the old piece). And measure lengths carefully. The pieces at the FLAPS probably won't be a perfect length, so plan to go to the next longer size and make larger bends to make up the difference. As I recall on the passengers side I made a larger bend by the fuel pump. It's all very straight forward.
__________________
Tim
timw700@hotmail.com
|