|
|
|
|
| Author |
|
|
Registered
Join Date: Aug 2000
Location: Williamsburg, VA
Posts: 1,147
|
WTB Passanger rear rigid brake line
Since I was a dumb A$$ and cut through mine I need a new/used brake line. Great way to start my weekend
If someone have made one from the FLAPS please let me know how that turned out. I need the piece from the PV to the hose connection on the rear passanger side. Cheers 
__________________
Kerry (Back on the road, sort of) 914-6 in the Werks |
||
11-23-2002, 02:46 PM
|
|
|
Registered
Join Date: Nov 2000
Posts: 362
|
I did that same replacement (on both sides) a while back with pieces from my FLAPS. It worked out perfect. Parts were way cheaper than OEM (for the pieces that were still available) and you can bend them all by hand (or you can get the fancy bending tool).
Make sure you get the correct thread ends (take in the old piece). And measure lengths carefully. The pieces at the FLAPS probably won't be a perfect length, so plan to go to the next longer size and make larger bends to make up the difference. As I recall on the passengers side I made a larger bend by the fuel pump. It's all very straight forward.
__________________
Tim timw700@hotmail.com |
||
|
11-23-2002, 06:30 PM
|
|
