Dismantled my clutch pedal on my United Kingdom spec car over the weekend. Can't get it back together ...
Okay all here is a diagram of the clutch pedal assembly.
So to reassemble it should be a case of bush (2) followed by pedal, then another bush (2) and finally clip (9)
The bushes are REALLY tight and I just broke one ...
So first thing. Anyone got advice on the bushes? I greased them with moly grease, still near impossible to fit.
When I disassembled the pedal, I removed the clip, then prises out the first bush, then the pedal, then final bush. There is not enough room to remove the lot in one go.
So I wonder if I have to let the entire bracket (31) go to make more room to slide the pedal back on (with bushes driven into the ends). But that doesn't look like a simple task due to the bar which extends the brake pedal from the left side of the car to the right ....
Help appreciated as always!