I followed Dwayne's setup too.
You can make your own very easily. Just measure carefully before you cut anything. Then once you have one cross-beam assembled, place it over the engine and push down hard so you make an imprint of the bolts along the fenders on the bottom, then drill holes here so the cross-beam will sit flat and won't slide around.
__________________
1974 911
1978 928 5spd hillclimb special
1984 928S 5spd, 1986.5 928S auto
1983 944, 1984 944 track car
1995 Saab 900 S, 1997 Saab 900 Turbo, 1999 Saab 9-3 S
|