|
Registered
Join Date: Jun 2001
Location: Lake Oswego, Oregon
Posts: 874
|
I changed to early bumpers on the yellow car. I used a Stainless Steel blind nut. I also used Stainless allen head bolt and washers.
I drilled a hole in the front and then tack welded it into place so theat it would not turn when tightening the allen head bolt.
The reason I used the allen head bolt is because of the clearance that you are faced with whe the lites are in place.
I tried to post a pic but PPBB does'nt take it.
CCLinLOO
__________________
Craig C. Laughlin CAMP 914
Helping to bring your 914 into the 21st century.
http://www.camp914.com
|