[veleno]

Car is a '90 S2

So I've replaced the clutch master, slave, blue hose, and hard like between master/slave. I used a Motive brake bleeder, raised the rear and bled the system with very little success.

I then raised the rear even higher, tried again, made sure the reservoir never got empty, and put between 5-10 lbs. of pressure on the reservoir and still no luck. Tried it with the pedal, got some pressure back to the pedal but still no luck.

The pedal continues to stay on the floor.

I can shift fine if I "eagle claw" the pedal up with my toes but damn that's not the way I want to drive around!

Any ideas what I can do to get the air out? I'm about to turn it in to the mechanic so he can give it a try...