|
Give KTL Kevin a shout. He can help you out with everything you need to know. Thanks Rob. Not sure if the SC has same rotors as Carrera 3.2 but on my 86 the rear 930 rotors fit on no problem, Had to adjust and roll back backing plate edge to accept the 965 calipers and increased diameter. Machined the 965 calipers to the 3 inch spacing 12 mm down from brake opening. On the front I used the floating hat rotors with the 993 tt rotors turned down to the 930 diameter about 8 thou machined off. This gives you the correct offset and then you use the 993 front calipers with the conversion 3.5 inch to 3 inch bracket. It is a bolt on conversion on front. Goodluck. You may need to go with the 930 brake master cylinder. On this conversion you would remove the proportioning valve. Thanks Rob
|