|
44 deg. here this morn.
Damn rear patio door project! Didn't get to install it on Sunday like I planned. When I pulled out the old french doors and was re-insulating and putting up new rock from the inside I had noticed that the RO had a sandwiched header with no spacer. I had also noticed that the outboard 2x12 had some bow in it.
No problem I thought to myself, I'll throw some 3/8s ply in there and get it right once I the siding was pulled off for the new door install.
Damn if the 2x12 on the exterior side wasn't in fact a 2x4! No wonder there was bowing. So, I had to regroup. Needless to say that it's a proper header NOW. Did I mention that when I first pulled out the old french doors, the only jack studs under the "header" at the time were 1x4s???!!! Was a bit of a ***** getting the new 2x12 up in there as the top plates had sagged since both had seams right over the opening.
I sometimes think that my house was built by monkeys.
__________________
Harmlessly passing gas in the grassland away;
Only dimly aware of a certain smell in the air
|