|
Well, what are the wattages of the bulbs you pulled out, and what are the wattages of the bulbs you put in? Going from incandescents to LEDs, you should consume way less power. Blowing a 15A fuse is not a good thing (and changing it to a 25A is just going to help you to fry your wiring harness).
I would start by putting everything back to stock. Replace one bult at a time until you find the one which causes the problem - likely as not, you have a defective LED on your hands and it is presenting as a direct short. If you can run the LEDs on the bench, all the better (at least it will be quicker).
__________________
Tom Coradeschi
03 Boxster
|