[A horse with no name]

Thanks - I have read that this is what should be done for the spring plate alignment.
So do you think if the torsion bar spline matches it's original position by punch marking it, including the inner metal housing of the bushing, I should get...'Walla! - Done

Originally Posted by rattlsnak

once the spring plate is unloaded, take a scribe, or flat screwdriver, and simply place it against the top edge of the spring plate and then 'scribe' or scratch a line into the inner wheel well the length of the spring plate. When you put it back together, just line up the spring late with that line and it will be exactly at the same spot it was when you took it off.