[A horse with no name]

Hi all, I phoned ER and Chuck answered my question...The spring plate settings will remain as they were when new if they have never been changed. Of course, this applies to whatever setting that the spring plate's had prior to replacing the bushings.

He said that by centre punching (or whatever way) both the spline tooth, the inner metal bushing housing, including scribing the spring plate on to the fender well, will result in having exactly the same setting's as the car had when the bushings were new.

As mentioned previously, I think that it may be the thing to do for those who are lowering their car by having the correct point when starting to index the torsion bar's spline's...Thanks for your inputs! Much appreciated.