[kiwiokie]

Thanks for the compliment Erik.

Em78911 There are some close ups on post #124 where you can see the bellows are not trimmed in any way. Instead the tips of the bumpers were cut off and new mounting holes drilled for the studs of the bellows. I used fiberglass bumper blades which made this job easier. The bellows had to be massaged to fit the new curve of the trimmed bumper and the stock side marker light was removed as it would have been partially covered by the bellows. The Euro rubber trim was installed instead of the marker light to better blend the bellows into the bumper. The devil is in the details.