|
Thanks John, I have the 924S electrical drawing and it calls out a fresh air relay and a fuse. From previous posts the relay should be # III and the fuse is #9.
My next task is to test the fresh air switch, the one with 0, 1,2 & 3. The problem is that it looks like the entire console needs to be be removed because it has some sort of clip on the back, just was not up for that yesterday.
If that checks out will need to bring a 12 volt source to the motor and see if that works.
The fresh air blower motor shroud on the has one fastener on the front and is held down by adhesive on the 924S.
Sounds like this job has a potential to be a hassle, and may have to be put on the back burner until this winter.
|