|
I apologize for the delayed response. I thought I had this forum setup to receive emails when I got comments, I guess I didn't...
18" wheels are required for these. The Z06 calipers are actually quite a bit harder to obtain than I originally thought. Many sites list them in stock, but unfortunately, do not actually have them. The pads can be changed with the calipers on the car. But these calipers use 6 "padlets" each. There are available single pad kits, but they require removing the caliper to change.
I am now working on another project to mount the C7 Z51 calipers (same as CTS and Camaro SS) on 358 Cayenne rotors. The brackets for these will also mount the smaller ATS Brembos on 330mm rotors for 17" wheels.
The Z06 design is complete for 951 and 944s. I'm hoping the next kit will be easier to obtain calipers though.
|