Parts Needed \ WTB

[911 Rod]

A rear seat delete kit and a bolt in roll bar is on my wish list.
(86 911)

[haycait911]

Originally Posted by TargaT

Hi looking for some bumper side scoops that direct air to the fender mount oil cooler. These replace the side marker lights on 911 bumpers. Also a radio delete plate.

Joe jd@dren.ca

have a scoop. $80 shipped.

[brighton911]

Late model variety needed, drop me a PM with the part number and your price. Thanks

Dave

[pors1968]

I have these.

[pors1968]

Originally Posted by haycait911

if by cab top you mean targa top, I'm interested. Don.

I have 84 roller type

[jamesjedi]

1990 Porsche 964 Engine For sale.

Sold

[pors1968]

E cam for carb.

[911 Rod]

Looking for the male plug that is part of the AFM.
Anyone?

[pors1968]

Look for any german car with afm they use same but two wire are diff color

[911 Rod]

Originally Posted by pors1968

Look for any german car with afm they use same but two wire are diff color

Yes.
Looking for a AFM from any german car with the same plug.

[TargaT]

Hi, looking for a pair of H4 paint grade trim rings.

[billybek]

Originally Posted by TargaT

Hi, looking for a pair of H4 paint grade trim rings.

Might have a pair in the garage somewhere. Will see if I can find them.

[jamesjedi]

WTB 1 1/2 headers for 3.0l 911.

[jamesjedi]

I have a targa top for sale. I have no clue what it worth? Looks to be in ok condition. It needs a good cleaning. I can post pictures tomorrow.

Thanks

[jamesjedi]

SOLD


911/964 crank and cam tools.

https://pcaucr.org/classifieds/show-ad/2385/cam-crank-tools/oakville/ucr-parts-for-sale-wanted/

Looking for P202 and P203 tools.

[Mark Henry]

Originally Posted by jamesjedi

911/964 crank and cam tools.

https://pcaucr.org/classifieds/show-ad/2385/cam-crank-tools/oakville/ucr-parts-for-sale-wanted/

Looking for P202 and P203 tools.

That's a smoking deal on those tools, only thing cheaper will be shop made if you can DIY. Last time I checked those were abut $1200 Canadian.

My 964 cams that I used in my 3.0SC engine (914/6 conversion) I welded up the nose, reground it and cut in the woodruff key slot.
Now it uses regular 901 sprockets and tools.

[jamesjedi]

They are not that expensive if bought in the US. The crank tool looks like it is sold. I still have the cam tool. I believe it can be used on the 3.2. I would need to confirm.

Thanks

[Mark Henry]

Originally Posted by jamesjedi

They are not that expensive if bought in the US. The crank tool looks like it is sold. I still have the cam tool. I believe it can be used on the 3.2. I would need to confirm.

Thanks

Sorry my bad, I thought it was the cam tools for a 90's...and that you were looking to buy.
The cam tool is for the '81-'89 cam sprocket. Never seen the crankshaft pulley wrench before, I just use a socket and breaker bar

IIRC the '90- uses the taper fit cam sprocket and have completely different (expensive) adjustment tools.

[jamesjedi]

SOLD


I believe the cam tool works from 81-98. I used it on my 964 engine. The crank tool is used to prevent the shearing of the crank pulley pin.

[gamtart]

Elephant Racing front Monoball bearings for 67-89 911/912/930 cars (part no 2011000). Selling them already installed in the camber plates. I had them on the car for about 500 kms.
Asking $250 plus shipping/PayPal fees