Parts Needed \ WTB

[Uwon]

Looking for ‘69-71 seats or early Recaros suitable for re-upholstery. Condition unimportant.
Johan

[Ed911S]

Looking for someone to repair/recover a dash in Toronto, know anyone or shop that does the work?

[Mark Henry]

Originally Posted by vitalstat

WTB PMO manifolds for my 78 SC 3.0L carb swap 40/40
Have to have the flange to cover the injector cut out on the SC head
email what you have tnymah@yahoo.ca

I made plates out of 3/16 aluminum for my 3.0 big port heads and stock weber intakes.

Below pic shows the plate but the orientation is wrong, the aluminum and phenolic spacers should be swapped around. 3 years no issues.

[vitalstat]

Thanks Mark Henry, I was contemplating that as well, will try now for sure

[Funcity]

Looking for an engine yoke if anyone has one out there!

Cheers,
Parker

[upwardr]

Looking for a set of 911 heater boxes for my 71T . Need a set in good condition.

[Funcity]

Looking for a set of SSI heat exchangers. For a 2.7, I believe thin flange.
Let me know what you have out there!
Thanks,
Parker

[Happytohaveone]

looking for a passenger door trigger for a 993 please

[Happytohaveone]

also thick flange ssi

[Happytohaveone]

also duck tail

[Jonny042]

Originally Posted by upwardr

Looking for a set of 911 heater boxes for my 71T . Need a set in good condition.

PM sent on heater boxes.

[pors1968]

Originally Posted by AlKidd

Looking for a bentley service manual for the SC's. Anyone have one they dont need. Only needs to be complete. Greasy and grimey is fine

There one for sale kijiji.

[AlKidd]

Originally Posted by pors1968

There one for sale kijiji.

The one in BC? Says sold.

[snypermom]

Looking for 915 transmission with an electrical speedo connection for a 1980 project

[NotStock]

Hey! Looking for a motor mount console and an air box for a 3.2

Thanks!

[JJ 911SC]

Originally Posted by NotStock

Hey! Looking for a motor mount console and an air box for a 3.2

Thanks!

Where are you located?

[Mark Henry]

Originally Posted by NotStock

Hey! Looking for a motor mount console and an air box for a 3.2

Thanks!

Not sure exactly what you mean...the engine section with the mount bar? Or just center mount part that mounts on the pulley area?

Put a WTB on 914world as many toss this part for the 914 engine mount.

[pors1968]

Originally Posted by NotStock

Hey! Looking for a motor mount console and an air box for a 3.2

Thanks!

I have a cab console.Where are you located.

[NotStock]

Hey! I'm located in New Brunswick. I currently have a cab console, but since I don't have a cab, I'd like to switch back to the standard console and bar. I really just want the console part that mounts the motor to the cross bar.

[pors1968]

Looking for for front vent window 65-68.5 clear or tinted IT FOR COUPE Thanks