Parts Needed \ WTB

[Mark Henry]

Originally Posted by Jp-oh

Hi, I'm looking for the floorboard hardware that is used to adjust the clutch pedal throw. Can't seem to find it sold independent of the floor board.

Thanks

914rubber has the repop floor boards, it wont be on their site, but if you ask (email) they will likely sell just the hardware. I'm certain the 914 and 911 floorboards are the same.

[Jezebel]

Originally Posted by Kerschbaumer

Looking for a pair of 7x16 Fuchs - flat black with patina/mild fading - preferably on the west coast for my '82sc

Took my stock 6"/7" fuchs off - they have glossy black finish. I put on 8" fronts off a 951 and 9" rear from turbo - both with matte black finish that show some fading/age.

The 8's rub in the wheel well and actually bit into fender lip on a big hit - so I want to replace them with 7". I would use my 7's but the finish is different. I could get all 4 refinished to look the same but I actually like the patina - I like that my car shows some age and not interested to replace everything with new. If someone happens to have a pair of 7x16' with similar finish I may buy them and sell/trade my glossy 6/7's.

Let me knowif this fits your need,
Regards

[RobFrost]

You could fit narrower tyres on the same rims. They look good like that.

Sent from my SM-G988B using Tapatalk

[TargaT]

let me know what you have

jd@dren.ca

[Jim2]

I need a right side 911 front control arm, mid 70s through mid 80s. The closer to Calgary the better.

Jim

[avville]

Don't need no more. Merci
Looking for complete Blower/alternator for a 911SC 3 litre engine.

[Mack198]

Originally Posted by haycait911

hi Robert. I was going to chrome these for TTG lights but I'll probably never get around to it. make me a fair offer if you can use them.

Is there different varieties of headlamp available

[Mark Henry]

Originally Posted by Mack198

Is there different varieties of headlamp available

These are fog lights (clear driving lights, yellow lenses for fog) for a 914 69-74'.
IDK if they were used on other models.

On my 914 I use H3 Pilot 193 lights, perfect replacement for the stock lights but unfortunately Pilot stopped making this model and old stock is getting harder to find.

[snypermom]

I'm looking for a front under stock bumper spoiler that mounts almost flush with the bumper. For a wide fenders set up as in the pictures.
Ideally in Ontario

[avville]

Don't need anymore merci.
I'm looking for 911E 69 MFI steel fuel lines on cylinders 4, 5 and 6.
Merci.

[Jim2]

Looking for red SC/930 engine shroud.

[Uwon]

16x9 Fuch 930 Rear Rims wanted. Let me know what you have.
Thanks,
Johan

[TargaT]

Hi Looking for one 17x9 Cup 1 knock off. 1 of mine is bent.
Thanks, Joe

[curtisr]

Originally Posted by TargaT

Hi Looking for one 17x9 Cup 1 knock off. 1 of mine is bent.
Thanks, Joe

Hi Joe,

Have you considered getting it straightened? Good wheel shops should be able to do this or, at least, point you in the right direction.

[TargaT]

Its pretty bad. Chances are it will crack and need to be welded. Not sure I'm comfortable with that on a track car.

[pors1968]

Need headrest 68 -71 D shape.

[AlKidd]

Anyone have a leather / pleather shift boot for an SC? I have the rubber, kong style but have installed a rectangular handled shifter and it doesnt fit. Prefer not to cut it.

[Kerschbaumer]

Looking for 2 tires in decent shape - 205/50/r16 to match Bridgestone RE-11 ish (summer performance / track tire)

Located on west coast - I live in Squamish

Have to downsize my front tires and have re-11's on rear still with decent tread.

[snypermom]

I am looking for a usable 24 pc set of head studs with hardware, used is fine
And a turbo lower valve covers.

[tholyoak]

Don't have any extra studs, but have a bunch of head nuts and washers

-Todd

Originally Posted by snypermom

I am looking for a usable 24 pc set of head studs with hardware, used is fine