Random TRANSPORTATION pictures

[kach22i]

This used to be a 1974 914..............a very rare and custom wide body?
914club.com > Portland 1974 914 Porsche wide body (Portland) $6500

[kach22i]

Marque1: October 2013

In 1962, Arkus-Duntov conceptualized a line of Corvettes that would be constructed entirely for racing, complete with a mid-engine layout, a monocoque chassis and a fuel-injected, aluminum alloy V-8 engine. The prototype came to be known as the Chevrolet Engineering Research Vehicle II, or CERV II.....................................

The stunning aerodynamic body was designed by Larry Shinoda and Tony Lapine. An alloy 377-cu.in. V-8 with Hilborn fuel injection (estimated to produce around 500 horsepower) was fitted to a unique all-wheel-drive system that used dual torque converters and varied the front-to-rear power split based upon vehicle speed. With a weight goal of 1400 pounds, titanium was used where possible and magnesium wheels fitted. Girling disc brakes were used all-round, while the CERV II’s independent suspension featured coil springs and Armstrong shock absorbers.

[pegasus9]

Frazier Mountain Park road. Yesterday.

[group911@aol.co]

[group911@aol.co]

[kach22i]

Style RSR 17 TRE Motorsports
Style RSR 17

Most common is a 9 and 11 x 17" combination for the turbo / turbo look/ iroc rsr cars. Pricing is approximately $2400 a set depending on finish , lug nuts , and center caps desired, and we recommend running 245/45 and 315/35 front and rear tires respectively.

http://www.tremotorsports.com/page.cfm?Node=11103

Coming soon ! 15" center lock RSR rims in a variety of widths and finishes (requires correct center lock adaptors and nuts available elsewhere)

17" two piece (cast center with spun aluminum outer rim) wheels that bolt on to your car ! NO adaptors , expensive wrenches, or center lock parts needed. Finally a bolt on rim with the aggressive factory race look to fill out the fenders on your 911. Available to order now !

[kach22i]

If You Want A Weird Porsche 911 Then You Need The Sbarro Challenge III insuranceinstantonline.blogspot.com ® car insurance instant online quote

In the 1980s, Sbarro built a car called the Challenge III. It was based on a 911 chassis and used Porsche's 3.3 liter engine. Its looks were more X-Wing than 911, and Sbarro only built ten of them. Now one of the ten can be yours.

[daepp]

Originally Posted by kach22i;7910433
[IMG

http://www.marque1.com/.a/6a00e54fcad7368833019affe3c2d5970c-800wi[/IMG]

Sounds like a lot of innovation, that might have made its way into production cars like the model at Porsche. I wonder who wouldn't listen in Detroit.

[sc_rufctr]

Originally Posted by kach22i;7910433

[kach22i]

Originally Posted by sc_rufctr

Originally Posted by kach22i;7910433

Another car from 1962 - I see a few similarities.

1962 Mustang I concept car
Ford Mustang History - 1962 | Shnack.com


And a few years later.............1965

Ford X-1
http://www.carguychronicles.com/2013/04/ford-gt40-roadster-missing-link.html


http://en.wikipedia.org/wiki/Ford_GT40#X-1_Roadster

The X-1 was a roadster built to contest the Fall 1965 North American Pro Series, a forerunner of Can-Am, entered by the Bruce McLaren team and driven by Chris Amon. ...........................

The car went on to win the 12 Hours of Sebring in 1966. The X-1 was a one-off and was later ordered to be destroyed by customs officials.

[dheinz]

At the Detroit Auto Show...

[kach22i]

Porsche 911 Turbo 3.6 Flachbau | Picture: 13271 - 12375 - 4WheelsNews


1994 Turbo S Flatnose

[widebody911]

[URY914]

[URY914]

[URY914]

[URY914]

[URY914]

[URY914]

[URY914]