Stijn!!

[Rick V]

Originally Posted by Geronimo '74

(did break two bolts holding the anti roll bar. The ones clamping the bushings to the bottom of the car, one on each side... grrrr)

OOPS

[porsche4life]

Howdy boys... Sorry I been so quiet... Was at a family thing yesterday and came home worn out.... I learned that I can in now way keep up with a three year old.... Too much energy for me... This morning I had to be up early for a PCA meeting...

[Rick V]

Bwahahahahahahaha
Now you know why I am so tired when the Grandson is here for the weekend (every other weekend)

[svandamme]

Originally Posted by Geronimo '74

Ok,
i need to raise the rear some more. Probably will get some blocks to put under the jackstands.
One thing I did not disconnect yet is the oil line going in the side of the case. Spanners not big enough....
Fan is still in place because I don't have the curved pulley tooley. Will try and borrow that sometime this week.

Stijn, it's a bit silly that you come for just the drop and then have to leave already....
No boozing afterwards....
If Friday is your only possibility, then it'll have to do, I guess.
At least stay for diner then.

(axles from tranny: check!)
(did break two bolts holding the anti roll bar. The ones clamping the bushings to the bottom of the car, one on each side... grrrr)

Is that a 36 nut or a 42? not sure if i have one for the oil lines

You don't need the curved pulley tool for removal, just snip the fanbelt, it's not like you will put your fresh rebuild in your car, with an old fanbelt, right?


If you can get the fan and the fan shroud off, with no exhaust, the engine should not be that high anymore, and it should come out nicely.
Getting the rear valance out would be nice as well, you'll want it off the car anyway when you put the engine back in...

[slodave]

Originally Posted by svandamme

Is that a 36 nut or a 42? not sure if i have one for the oil lines.

Pipe wrenches.

[Rick V]

Oxy/Ace red wrench

[slodave]

Sure, Rick... 'Cause everyone has an oxy setup lying around their garage...

[Rick V]

Uh huh.
Right next to the hammers, pry bars and other carb tools.

[Geronimo '74]

Originally Posted by Rick V

OOPS

No biggie, they are accesible from behind.
They're soaked in penetrating oil now, and if I can't get them loose, I'll drill them out out and put a new nut on the back.

[nynor]

"No biggie, they are accesible from behind." quote of the year?

rick, how did the work thing go?

[GH85Carrera]

Originally Posted by Rick V

Uh huh.
Right next to the hammers, pry bars and other carb tools.

Are those carb tools the same as the watch repair tools?

[porsche4life]

Ok boys.... Time for another poker night... See ya about noon tomorrow....

[GH85Carrera]

I presume that is poker not Poke-her

[porsche4life]

Well... There are a few ladies coming.... Just have to see if I "play my cards" right....

[nynor]

your cards, from past history, have been all jokers!!!!

[Jim Richards]

[porsche4life]

Haha .. I know... I need to try harder/lower my standards... I always go for the least trampy girl in the room....



Hehe... I accidentally got the 6k post.

[GH85Carrera]

6001 for me!

[nynor]

Originally Posted by porsche4life

Haha .. I know... I need to try harder/lower my standards... I always go for the least trampy girl in the room....



Hehe... I accidentally got the 6k post.

that, actually, is a wise policy. more sex is not necessarily better sex. in fact, i would bet that the exact opposite is true. if you wanna fk a dog, go to the pound.

[porsche4life]

Holas boyz... I lost poker.... I think I will hate life soon....