Stijn!!

[Rick V]

Sa-Weet

[slodave]

The board will sit in the shop for a few days because of all the rain. I plan on getting started next week.

[Rick V]

Nice, make sure to get pics along the way, it'll be great post whoring stuff

[slodave]

Ya know it! There will be a thread dedicated to it.

[Rick V]

Well don't forget to share here as well.

[slodave]

I'm just nervous on one detail. The mahogany that I bought for the body is about 7" wide, which means that I have to biscuit and join to halves to make a 14" (cut to 13" final).... Traditionally, the LP body is one piece. I don't expect this to be such a close clone, that it's indistinguishable from a '59.... I can buy single planks online, but that will cost more, especially with shipping. Some of the blanks are African Mahogany, not the traditional Honduras - which is what I bought. I'm worried about aesthetics. But you would only see the joint line if you look at the back or at the tail stock, but that would be covered by a strap anyway. It should not affect tone much, if at all.

[Rick V]

You never know about the tone, they have a way of doing what they want. (Willie Nelson's is a great example). My es350 is a surprisingly strong unit, very mellow, from a model that is usually very brassy. Just enjoy the build and play what it gives you.

[slodave]

I know wood affects tone and that you can build two almost identical guitars and they will sound different. I'm just not sure that making a blank out of two will really alter the tone. Even more, the early LP's were all hand made and each varies from the next, including how hardware was mounted. Then, Gibson started to chamber the LP in the '80s, really screwing with tone, as they had not developed a uniform technique for chambering.

Ack, stop worrying! If nothing else, I'm sure it will sound better than the one I made 20 years ago.

[Noah930]

Originally Posted by porsche4life

Yikes!

The pharmd here is like 12k/yr


Oh.... 15k!

Just ran into the neighbor girl. PharmD tuition at 'SC runs $45K. Per year.

[porsche4life]

So, you got 180k?

[Noah930]

That's more like $360K pre-tax.

[pete3799]

So Dave....your saying your wood's not long enough?
Join the club

[porsche4life]

Doc? Are you that bad at math, or did you mean 45k/semester?

[slodave]

Originally Posted by pete3799

So Dave....your saying your wood's not long enough?
Join the club

6 board feet is a pretty good size for the moment... I think everyone could be proud with that. It's going to get smaller, I do worry about that.

[GH85Carrera]

Just remember the shrinkage!

[slodave]

It's kiln dried. Even exposed to freezing cold, I think my wood won't shrink. If it does, it won't be noticeable.

[porsche4life]

Evening guys, had a pretty busy day at work. Will work tomorrow till 4 to help the last minute crowd. Then hell begins. For some stupid reason we are eating dinner friday, lunch saturday, and dinner Saturday with my dads family. Were's the rum?

[slodave]

Originally Posted by porsche4life

Evening guys, had a pretty busy day at work. Will work tomorrow till 4 to help the last minute crowd. Then hell begins.

No, no, no.... Then Christmas begins... Hell begins in 2012...

[porsche4life]

Bah Humbug...


I mean, goodnight...

[Geronimo '74]

Good morning... No worky worky today!! or for the next threeeeeee weeks!!

It has started snowing here again....there's about 8 inches on my outside table....


Travis, 220 miles on a full tank of gas?? you sure it's not leaking??? It seems so little. I can double that with the 911....



I watched The Expendables... sucked