Pelican Parts Forums

Pelican Parts Forums (http://forums.pelicanparts.com/index.php)
-   Off Topic Discussions (http://forums.pelicanparts.com/forumdisplay.php?f=31)
-   -   Random Spoon Pics Thread (http://forums.pelicanparts.com/showthread.php?t=718780)

Bill Douglas 02-08-2014 08:17 PM

A 308, I'd do the break in procedure with that. As to whether or not it works or what ever the debate is I'd give it the benefit of the doubt and do it.

abisel 02-09-2014 03:36 AM

New barrels have tooling marks in the bore and a break-in is required to get the smoothest possible bore for accuracy sake. Granted, this is a production barrel and may not have the tighter tolerances of a match barrel, but a break-in is really the way to go.

Like what was said, clean the bore after every 5 rounds until 50, then after every 10 rounds until 100. Use Sweets 7.62 to get every bit of copper fowling from the grooves/lands until the patch pushed through the bore comes out completely clean.

And of course I assume you know to NEVER clean a rifle bore from the muzzle end but rather from the chamber end. Some rifles like the M1 and M1A you cannot do this, and there are guides offered for these rifles to minimize any damage to the crown. If you ding the crown during cleaning, it can cause accuracy to fall off.

This product has worked great when I broke-in my match barrel on my competition AR.
308 FF Ammo - DTAC - FINAL FINISH by Superior Shooting Systems

targa911S 02-09-2014 06:27 AM

Quote:

Originally Posted by 126coupe (Post 7900200)
These were at the bottom of my dad's safe corroding about 3 years ago, brought them back to life 45 Gold Cup and a Walther.

http://forums.pelicanparts.com/uploa...1391904051.jpg
http://forums.pelicanparts.com/uploa...1391904075.jpg

That Walther looks like a PP. my favorite Walther. What cal. is it?

Hoots 02-09-2014 06:57 AM

Starr Arms

<iframe src="https://www.flickr.com/photos/86693060@N00/12362797415/player/f8e3608c30" height="600" width="800" frameborder="0" allowfullscreen webkitallowfullscreen mozallowfullscreen oallowfullscreen msallowfullscreen></iframe>

Henry Schmidt 02-09-2014 08:16 AM

Star 9mm Para Model B with Waffenamt proof (WaA251).
The name of the officer it was issued to is written in the lid.
As far as I can tell, unfired. I'm not a fan of Nazi **** but she is sweet.
I have a Norwegian 1914 as well but not because the Nazis made it.

http://forums.pelicanparts.com/uploa...1391965104.jpg
http://forums.pelicanparts.com/uploa...1391965155.jpg

Henry Schmidt 02-09-2014 10:09 AM

I'm pretty sure if you're going to own a German issue Star, you should also have the holster......


http://forums.pelicanparts.com/uploa...1391972854.jpg
http://forums.pelicanparts.com/uploa...1391972893.jpg

emcon5 02-09-2014 12:16 PM

Let's see if anyone can ID this one:

http://www.shedracing.net/imgmisc/da...ig_ring_sm.jpg

Rick V 02-09-2014 12:20 PM

Converted Mauser. An old 8mm

Henry Schmidt 02-09-2014 12:48 PM

Quote:

Originally Posted by emcon5 (Post 7901559)
Let's see if anyone can ID this one:

http://www.shedracing.net/imgmisc/da...ig_ring_sm.jpg

Does the rest of it look like this?



http://forums.pelicanparts.com/uploa...1391982452.jpg
http://forums.pelicanparts.com/uploa...1391982466.jpg

Rick Lee 02-09-2014 04:55 PM

I was shopping for a Springfield XD yesterday and impulse bought an FN FNS 40 instead.
http://forums.pelicanparts.com/uploa...1391997331.jpg

emcon5 02-10-2014 07:59 AM

Quote:

Originally Posted by Henry Schmidt (Post 7901605)
Does the rest of it look like this?

Somewhat.

It started life as a Gewehr 98, was converted to a K98 at some point, and then re-barreled to 7.62 Nato by the Israelis. It has a mix of Imperial, pre Nazi German Nazi, and IDF marks.

http://www.shedracing.net/imgmisc/danzig_small.jpg

varmint 02-10-2014 03:04 PM

http://forums.pelicanparts.com/uploa...1392077060.jpg

nynor 02-10-2014 05:23 PM

Quote:

Originally Posted by varmint (Post 7903669)

and that, my friends, is what you get if you want to buy an AR15 in california.... LOL! looks like a deer antler got sexed by ruger 10/22.

porsche4life 02-10-2014 05:47 PM

Still gets the job done. ;)

Henry Schmidt 02-10-2014 05:50 PM

Kind of a sexy old Savage 1907 (Art Deco) in 380ACP. Rumor has it that Dillinger was carrying one of these when he was killed.

http://forums.pelicanparts.com/uploa...1392086895.jpg
http://forums.pelicanparts.com/uploa...1392086912.jpg
http://forums.pelicanparts.com/uploa...1392086964.jpg

targa911S 02-10-2014 06:27 PM

one of my faves Henry..got that ray gun look.

KaptKaos 02-10-2014 07:44 PM

Quote:

Originally Posted by varmint (Post 7903669)

My buddy is building one of these. Thorsden stock. The buffer tube cover has cheek weld attachments. Can't wait to try it.

Henry Schmidt 02-11-2014 04:43 AM

Quote:

Originally Posted by targa911S (Post 7904056)
one of my faves Henry..got that ray gun look.

Although it's not a bulls-eye pistol, it shoots well and fits even my club-like hand.
I have a pension for old things that work like they were new. I can't think of even one plastic pistola I would rather own......Well maybe an FN 57.

I guess the next step is chrome.......ha ha ha ha

targa911S 02-11-2014 04:54 AM

Mj and I have collected Art Deco for 30+ years. You don't see these pistol very much any more. Yeah bright chrome would be perfect. I'm heading over to the shop later to pick up the Mark X and the wood you sent.. NEW BENCH THREAD COMING SOON.

Henry Schmidt 02-11-2014 05:09 AM

Quote:

Originally Posted by targa911S (Post 7904593)
Mj and I have collected Art Deco for 30+ years. You don't see these pistol very much any more. Yeah bright chrome would be perfect. I'm heading over to the shop later to pick up the Mark X and the wood you sent.. NEW BENCH THREAD COMING SOON.

Teri and I were big collectors of Erte', so Art Deco was always been an influence in our appreciation of the world around us.

The Mark X is no scuff and buff project. I look forward to watching you do your magic.

http://forums.pelicanparts.com/uploa...1392127734.jpg


All times are GMT -8. The time now is 10:39 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website


DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.