Compliance/ VIN decal service

[914 4 me]

Hello All,

Let me introduce myself first. My name is Andy and I've been a 914 owner for over 10 years. Recently I purchase a factory 914-6 for restoration that started the quest to imprint the VIN/Compliance decal that Bob Moglia produces for our cars. After many iterations I am please at the results and have been supplying them to the 914 group and with Bobs help now have the details to run them for the 911's.

The decals are $90.00 each with your VIN, production date and tamper cut circles like the original decals. If you have already purchase a decal from Bob subtract $10 and include it with your order form and supporting documents. Please insure the decal arrives without creases or bent corners as this may make the decal unusable. Below is a link to download the order form. On page two are photos of all versions of the decals and options needed to choose the correct decal for your model year. I also can reproduce the number 7 defect for pre- 75 cars if desired. see attached photo.

Included will be instructions for applying your decal. Your decal will have transfer tape to hold decal together and allow alignment during application.


Click on link

https://www.dropbox.com/s/b9xxwb82m27jgqr/Decal%20Order%20Form%20911%20.docx?m

Feel free to email me with any questions and Thanks,

Andy Thonet
athonet@socal.rr.com
My restoration thread, http://www.914world.com/bbs2/index.p...T&f=2&t=101062

[Arne2]

Bad link...

[914 4 me]

Thanks for the heads up, link fixed

[DRIVE]

I am looking for a ‘72 914 VIN sticker, as well as 74 and 74 911 stickers.
Are you (or Bob Moglia) still producing these?

Thank you,
David K
Irvine CA

[almostordinary]

I was able to reach out to the team at Carbone and they quickly sent me a reprod VIN sticker.

[tmsautoart]

CarBone is no longer reproducing VIN decals with the Porsche name or crest from what I was told (by CarBone)

[doswald]

CarBone had stopped for a while, but has now restarted their production. I just received mine-very nice, but doesn’t have the tamper proof circles, as depicted above. The total cost, with import fees, was about $125.

dho

[tmsautoart]

Originally Posted by doswald

CarBone had stopped for a while, but has now restarted their production. I just received mine-very nice, but doesn’t have the tamper proof circles, as depicted above. The total cost, with import fees, was about $125.

dho

Awesome! I hope that's true for 911SCs too!

[KerryM]

I just noticed that the original post is over 10 years old. Thus not surprised that the link does not work.

[almostordinary]

Carbone Customer Rep:

Bartlomiej Slawinski
Customer Advisor
e-mail: b.slawinski@carbone.pl