FS! Lots of 914 parts

[slcarr]

I have a ridiculous amount of 914 parts.
Everything for body and trim.
2.0ltr. Engines and parts
2.2ltr. With electromotive fuel injection, complete engine with exhaust, very low mileage, runs great, lots of power. Built by AJRS in Grand Junction Co.
Fuchs wheels, 5.5x15 4 bolts, 5.5x14 5 bolt, 6x15 5 bolt, 8x15 5 bolt 7x1 5 5 bolt
Clutches, carburetors and manifolds, Weber and Delloroto
Stock suspension, front and rear
911 suspension parts, Koni struts and S calipers, Boge struts and KYB inserts. Rear 108mm 5 bolt flanges, calipers and rotors.
Sway bars 1 rear with everything, 1 front threw body 15mm, 1 threw body 13mm
Lots of glass and regulators including early cable type.
Interior parts and trim.
911 engines, tail and side shifter transaxles, 911 901 transaxles, 1.7 engines
Project cars.
73 2.0ltr. Black/black, Fuchs, frt/rr sway bars, solid car tired engine, other engines available
74 914/6 conversion car, roller, GT look, pretty nice interior, 5 bolt, oil tank, engine mount, sheet metal, modified shift rod. 911 engine and Trans available.
71 with 2.0ltr. And side shifter, engine spit out oil galley plug, I may part this one out?

[hank911]

Prices?
how much for the rear sway?
Ducktail?
Early grills?
2.2 or 2.4 plug & play?

[Mark Henry]

Rules state you must have prices. Plus you will have better luck if you provide more details and pictures.

[tweet]

Hi. Interested in the 911 front suspension, and rear suspension set-up, one 40-Dellorto. Do you have any shift knobs and leather boots? Please respond with pictures and prices. Serious buyer.
thanks,
dan

[slcarr]

Originally Posted by hank911

Prices?
how much for the rear sway?
Ducktail?
Early grills?
2.2 or 2.4 plug & play?

Sent a message to your personal email. Thanks, Steve

[slcarr]

Originally Posted by tweet

Hi. Interested in the 911 front suspension, front sway bar 15mm, and rear suspension set-up, one 40-Dellorto. Do you have any shift knobs and leather boots? Also do you have any mounting hardware for a rear sway bar and stainless steel heat exchangers for a 1.8L? Please respond with pictures and prices. Serious buyer.
thanks,
dan

Did I reply to your inquiry? Please email me at slcarr.steve@aol.com.

[914/6packer]

Originally Posted by slcarr

I have a ridiculous amount of 914 parts.
Everything for body and trim.
2.0ltr. Engines and parts
2.2ltr. With electromotive fuel injection, complete engine with exhaust, very low mileage, runs great, lots of power. Built by AJRS in Grand Junction Co.
Fuchs wheels, 5.5x15 4 bolts, 5.5x14 5 bolt, 6x15 5 bolt, 8x15 5 bolt 7x1 5 5 bolt
Clutches, carburetors and manifolds, Weber and Delloroto
Stock suspension, front and rear
911 suspension parts, Koni struts and S calipers, Boge struts and KYB inserts. Rear 108mm 5 bolt flanges, calipers and rotors.
Sway bars 1 rear with everything, 1 front threw body 15mm, 1 threw body 13mm
Lots of glass and regulators including early cable type.
Interior parts and trim.
911 engines, tail and side shifter transaxles, 911 901 transaxles, 1.7 engines
Project cars.
73 2.0ltr. Black/black, Fuchs, frt/rr sway bars, solid car tired engine, other engines available
74 914/6 conversion car, roller, GT look, pretty nice interior, 5 bolt, oil tank, engine mount, sheet metal, modified shift rod. 911 engine and Trans available.
71 with 2.0ltr. And side shifter, engine spit out oil galley plug, I may part this one out?

Can you contact me about youre parts? Peter peterjobuzz@yahoo.com

[KID914]

pics and price for a pillar trim.?

[rvanderpyl]

I need a good, no excuses, 5 speed 901 side shift transmission. Either rebuilt, or out of a car that was being driven and that you know personaly shifts well, and all of the syncros are fine. Also you have to be willing to ship to Canada. Given all those conditions,nor you have anything,give me a PM

[john maples]

I am considering stroking a 2.0 914 motor. Would you have a carb setup?

[slcarr]

Originally Posted by tweet

Hi. Interested in the 911 front suspension, and rear suspension set-up, one 40-Dellorto. Do you have any shift knobs and leather boots? Please respond with pictures and prices. Serious buyer.
thanks,
dan

Hi, did we ever connect on this? I will have everything but what are you doing, a 6 conversion or just looking for 4 cylinder suspension parts? If you would send to my email slcarr.steve@aol.com. Thanks, Steve

[slcarr]

Originally Posted by john maples

I am considering stroking a 2.0 914 motor. Would you have a carb setup?

PM sent

[slammin]

interested in the front sway bar set up. 15 mm i think it was the heaver of the two send info and price to samphelps111@yahoo.com or 845 778 1420 thanks slammin

[slcarr]

Originally Posted by KID914

pics and price for a pillar trim.?

Did I respond on this? Are you looking for outside or inside A pillar trim?
Thanks, Steve

[slcarr]

Originally Posted by john maples

I am considering stroking a 2.0 914 motor. Would you have a carb setup?

Did I respond to this? I have either Webers or Dellorotos with linkage. $600 plus shipping. Thanks, Steve Lindholm

[stick914]

interested in 2.0
Crank
rods
Intake(fuel injection)
Might be interested in complete 2.0

[slcarr]

I have crank and rods, have a complete GA with fuel injection, ran when taken out but sell as a core, a 2.2ltr. Complete type 4 with electromotive fuel injection, custom built, 1 2.0ltr. Complete but apart, 2 more 2.0ltr. Engines in cars, 1 runs but tired other needs to be taken apart and inspected. Lots of Weber and Dellorto carb set ups. I have been collecting and parting out 73 and earlier 911/912 and 914 parts for years. Most everything available. Thanks, Steve Lindholm

[chefpetere77]

Looking for front and rear sway bars for my 75 2.0.

Also chrome front and rear bumpers w/o tits.

Rear chrome sail trim pieces both sides.

Also, the spring and engine parts that operate the flapper box to allow cooling of the engine.

Thank you

Peter

[ovilla]

Interested in 15x6 5 bolt Fuchs. Please PM me a price and pics. Thanks

[Steve73-2.0]

Do you have a working manifold pressure sensor for the 73 2.0? The version I need is 0280100037.