FS: Weber Carb kit for 914 New

[esses62]

For sale is a brand new weber carburetor set from aircooled. includes intakes, linkage, air filters, fuel pump and fuel filter tuned for porsche 914. Never installed. Brand new in box. Weber ICT Redline kit K-1412
Contact me at SRV1510 at gmail Shipped from Staten Island NY 10304

$400

[racingredsc]

I'll take this.

[esses62]

Thank you, Charles . I just shipped it out.

I have an identical set available as well.

One more set still available.

[petza914]

What size are these (venturis). Any upgrades like velocity stacks, spray bars, linkage, etc. Can yiu email me the photos to petza914@gmail.com where I can enlarge them to see better?

Thanks.

[esses62]

Originally Posted by petza914

What size are these (venturis). Any upgrades like velocity stacks, spray bars, linkage, etc. Can yiu email me the photos to petza914@gmail.com where I can enlarge them to see better?

Thanks.

I paid $542 at Aircooled.net

They performed a ACN Carburetor Setup - Clean, Rejet & Optimize Dual 2 bbis- 55/135/160

comes complete with linkage for Hex bar , air filters, intake manifolds , fuel lines, hardware.

[petza914]

Thanks. So is this 2nd set not brand new like the first, but refurbished instead?

On the specs, are you saying that the venturi size is 55mm (that's huge BTW), the idle jet a 135 and the main a 160 or am is misunderstanding the #s?

[esses62]

Hi Pete,
Both sets are brand new. These were tuned for a 914 by aircooled this is a description of their tuning service.


"
Air-cooled.Net offers the finest carburetor setup for all your new Weber Carburetors purchased from us. We have extensive experience with the Weber IDA, IDF, DFAV/DFEV (Progressive), and ICT. We have jetted thousands of Webers for Aircooled VWs, and know what works and why. Any needed jet and emulsion tube changes are included at no additional charge when you purchase this service at the time of your Weber Carburetor Kit purchase.

We disassemble the carburetors, and then clean and inspect them. We trim gaskets, replace parts, adjust them properly, and then finish it off by jetting it to your needs, taking into account your engine specs, usage, and your elevation (please specify in your Order Notes during checkout). The Carb Setup Service does NOT include: preassembly of the linkage in the kit, nor do we "test-run" the carburetors (that would render them "used" and no longer new, and would also create shipping problems due to residual fuel smell). So there is still some assembly, installation, and FINE-tuning required on your end when you receive your carb kit. But since we check for and correct the multiple issues that factory assembled carbs commonly have "out of the box", and then jet them based on our owner's many years of experience for your submitted engine, elevation, and driving specifications,they are as close as they can be to "bolt-on" short of us actually installing them on your vehicle for you!

Weber carburetors come with out-of-the-box jetting that is usually different than what you need, often the cost of the jets and emulsion tubes you need to change to is more than we charge for it including the labor! So this is a great deal for you!"

These should bolt on and start up without any issues.

[petza914]

Originally Posted by esses62

Hi Pete,
Both sets are brand new. These were tuned for a 914 by aircooled this is a description of their tuning service.


"
Air-cooled.Net offers the finest carburetor setup for all your new Weber Carburetors purchased from us. We have extensive experience with the Weber IDA, IDF, DFAV/DFEV (Progressive), and ICT. We have jetted thousands of Webers for Aircooled VWs, and know what works and why. Any needed jet and emulsion tube changes are included at no additional charge when you purchase this service at the time of your Weber Carburetor Kit purchase.

We disassemble the carburetors, and then clean and inspect them. We trim gaskets, replace parts, adjust them properly, and then finish it off by jetting it to your needs, taking into account your engine specs, usage, and your elevation (please specify in your Order Notes during checkout). The Carb Setup Service does NOT include: preassembly of the linkage in the kit, nor do we "test-run" the carburetors (that would render them "used" and no longer new, and would also create shipping problems due to residual fuel smell). So there is still some assembly, installation, and FINE-tuning required on your end when you receive your carb kit. But since we check for and correct the multiple issues that factory assembled carbs commonly have "out of the box", and then jet them based on our owner's many years of experience for your submitted engine, elevation, and driving specifications,they are as close as they can be to "bolt-on" short of us actually installing them on your vehicle for you!

Weber carburetors come with out-of-the-box jetting that is usually different than what you need, often the cost of the jets and emulsion tubes you need to change to is more than we charge for it including the labor! So this is a great deal for you!"

These should bolt on and start up without any issues.

Is this a lifetime service that they offer. The reason I ask is because I probably need a different setup than what you have. I'm running a high-end street cam with greater lift and duration, about 37 degrees of advance at 3,000 RPM, heads with 38mm x 48mm valves, Pertronix ignition, Hot-Wires, etc. Currently I have dual 45mm Dellorto carbs installed but I remember the car running better in the past and it seems like the cost of a rebuild on my current carbs is about what buying your new set of Webers would cost me, but I need someone who knows the Webers to set them up for this application, like in the description you posted of what they do.

[esses62]

Originally Posted by petza914

Is this a lifetime service that they offer. The reason I ask is because I probably need a different setup than what you have. I'm running a high-end street cam with greater lift and duration, about 37 degrees of advance at 3,000 RPM, heads with 38mm x 48mm valves, Pertronix ignition, Hot-Wires, etc. Currently I have dual 45mm Dellorto carbs installed but I remember the car running better in the past and it seems like the cost of a rebuild on my current carbs is about what buying your new set of Webers would cost me, but I need someone who knows the Webers to set them up for this application, like in the description you posted of what they do.

Yes. They charge $80 for the setup. You would send them the carbs and they would set it up to your specs. They are very good at what they do.

[racingredsc]

My parts came last night.; Excellent deal!!!

[esses62]

SOLD thank you racingredsc

[esses62]

One more carb kit available from aircooled.net same specs 'new in box'

$350

[Dale2]

Do you still have complete set available? I have a 1973 2.0.

Thanks!

Dale