|
|
|
|
| Author |
|
|
Registered
Join Date: Aug 2003
Posts: 1
|
928 noise
I have a question about a noise coming from underneath my 1985 928 I thought it was a loose heat shield around the exhaust and put it on jack stands to check but they are all tight. The noise sounds like something turning and being bounced around, The noise does not change when I put the car through the gears in the trans ( automatic) any ideas? Thanks
|
||
08-09-2003, 06:05 AM
|
|
|
Registered
Join Date: Feb 2003
Location: Central Florida
Posts: 28
|
Torque tube... bad bearing(s)?
|
||
|
08-09-2003, 07:33 AM
|
|
|
Registered
Join Date: Jan 2001
Location: (the other) WA state
Posts: 220
|
kurt.... uh, CV joints??
m'reel
__________________
macreel '79 924 (red) '84 928S (copper) |
||
|
08-17-2003, 01:27 PM
|
|
|
Registered
Join Date: Dec 2002
Posts: 12
|
You need to get it up on a lift and check it out real good. Is the noise light and tinny sounding or like heavy grinding metal or clunking sounding? CV joints will sound heavy an clunky. Torque tube noise will sound like a whine right down the center of the car that increases in pitch with speed. Something that sounds loose and banging around might be in the brakes like a loose dust shield.
__________________
Gerry 83 928 EuroS 5spd 84 928 EuroS Auto 87 944S 5spd 90 750il 91 560 SEL |
||
|
08-26-2003, 06:03 AM
|
|
